9 foot 3-4 valve brass

Post Reply
skeletal
Posts: 50
Joined: Thu Nov 19, 2020 11:51 am

9 foot 3-4 valve brass

Post by skeletal »

Bass trumpet/valve trombone/marching trombone/baritone/marching baritone/flugabone/trombonium/euphonium/marching trombone.

Which one's did I miss?
User avatar
BGuttman
Posts: 6390
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: 9 foot 3-4 valve brass

Post by BGuttman »

Among the Saxhons there are tenor, baritone, and bass. All the same length, different bore sizes. Nobody plays saxhorns any more, though (except in Civil War Reconstruction bands).

At one time there were American tenor horns, baritone horns, and bass horns patterned after the saxhorns. All looking like a later American baritone horn. Also pretty obsolete.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
User avatar
Burgerbob
Posts: 5157
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: 9 foot 3-4 valve brass

Post by Burgerbob »

There are marching euphoniums, and even bariphoniums if you want to split hairs enough.
Aidan Ritchie, LA area player and teacher
marccromme
Posts: 358
Joined: Fri Mar 30, 2018 7:03 am
Location: Copenhagen, Denmark
Contact:

Re: 9 foot 3-4 valve brass

Post by marccromme »

German Tenorhorn and German baritone. And of course frensh horn in Bb, and tenor Wagner tuba in Bb.
User avatar
elmsandr
Posts: 1087
Joined: Fri Mar 23, 2018 2:43 pm
Location: S.E. Michigan
Contact:

Re: 9 foot 3-4 valve brass

Post by elmsandr »

Wagner Tubas?
User avatar
Finetales
Posts: 1090
Joined: Fri Mar 23, 2018 12:31 pm
Location: Los Angeles
Contact:

Re: 9 foot 3-4 valve brass

Post by Finetales »

The Bb side of all double and triple horns, marching Bb horn, Kaiser baritone, bass flugelhorn, bass cornet (very rare), ballad horn, and technically there are multiple distinct species of bass trumpet.
BGuttman wrote: Fri Dec 04, 2020 11:16 am Nobody plays saxhorns any more, though (except in Civil War Reconstruction bands).
Not quite true, bass saxhorn is still manufactured by Courtois, Willson, and probably PGM Couesnon, and there are people who play it very well.
Last edited by Finetales on Fri Dec 04, 2020 5:49 pm, edited 1 time in total.
User avatar
LeTromboniste
Posts: 1193
Joined: Wed Apr 11, 2018 7:22 am
Location: Sion, CH

Re: 9 foot 3-4 valve brass

Post by LeTromboniste »

Valved ophicleide
Maximilien Brisson
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

tenor tuba
https://meisterinstrumente-kroning.de/i ... b/?lang=en

tenor helicon
https://www.virtuosityboston.com/wurlit ... licon.html

superbone




yeah saxhorn - still a thing in france.

User avatar
Finetales
Posts: 1090
Joined: Fri Mar 23, 2018 12:31 pm
Location: Los Angeles
Contact:

Re: 9 foot 3-4 valve brass

Post by Finetales »

jacobgarchik wrote: Fri Dec 04, 2020 4:36 pm tenor helicon
https://www.virtuosityboston.com/wurlit ... licon.html
Good one, tenor sousaphone as well.
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

Tenor normaphone and tenor jazzophone

https://brasspedia.com/index.php?title=Normaphone
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

bonanza of forgotten configurations here, in tenor and baritone varieties too:

https://eabbpodcast.com/episode-7-inter ... collector/
User avatar
Doug Elliott
Posts: 3443
Joined: Wed Mar 21, 2018 10:12 pm
Location: Maryand

Re: 9 foot 3-4 valve brass

Post by Doug Elliott »

In the late 1970's I heard a jazz player play a gig on Normaphone in DC, I think it was at the One Step Down. Maybe it was Scott Robinson.... ?
"I know a thing or two because I've seen a thing or two."
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

marccromme
Posts: 358
Joined: Fri Mar 30, 2018 7:03 am
Location: Copenhagen, Denmark
Contact:

Re: 9 foot 3-4 valve brass

Post by marccromme »

elmsandr wrote: Fri Dec 04, 2020 2:40 pmWagner Tubas?
Yes, usually played by frensh horn players in Nibelungen , Walkyrie or similar late romantic operas, often Wagner, Mahler, Berlioz. the most famous ones are from Alexander, Mainz, Germany.

https://gebr-alexander.de/en/wagner-tubas/
User avatar
LeTromboniste
Posts: 1193
Joined: Wed Apr 11, 2018 7:22 am
Location: Sion, CH

Re: 9 foot 3-4 valve brass

Post by LeTromboniste »

marccromme wrote: Sat Dec 05, 2020 10:14 am
elmsandr wrote: Fri Dec 04, 2020 2:40 pmWagner Tubas?
Yes, usually played by frensh horn players in Nibelungen , Walkyrie or similar late romantic operas, often Wagner, Mahler, Berlioz. the most famous ones are from Alexander, Mainz, Germany.

https://gebr-alexander.de/en/wagner-tubas/
No Wagner tubas in Mahler or Berlioz that I know of (although both did write for other Bb valved instruments).

Strauss, Bruckner and Stravinsky, yes.
Maximilien Brisson
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

marccromme
Posts: 358
Joined: Fri Mar 30, 2018 7:03 am
Location: Copenhagen, Denmark
Contact:

Re: 9 foot 3-4 valve brass

Post by marccromme »

LeTromboniste wrote: Sat Dec 05, 2020 10:49 am
marccromme wrote: Sat Dec 05, 2020 10:14 am

Yes, usually played by frensh horn players in Nibelungen , Walkyrie or similar late romantic operas, often Wagner, Mahler, Berlioz. the most famous ones are from Alexander, Mainz, Germany.

https://gebr-alexander.de/en/wagner-tubas/
No Wagner tubas in Mahler or Berlioz that I know of (although both did write for other Bb valved instruments).

Strauss, Bruckner and Stravinsky, yes.
Yes, you are right, I was thinking of Mahlers 7th, but it's tenor horn there.

But we forgot Schoenberg and Bartok
Mikebmiller
Posts: 886
Joined: Tue Mar 27, 2018 9:13 am
Location: Spartanburg, SC

Re: 9 foot 3-4 valve brass

Post by Mikebmiller »

What is the difference between a saxhorn and a euphonium? Bore size?
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

more of a different wrap than a different instrument, but here's a variation on the bass trumpet.

https://www.kanstul.com/instruments/zig ... s-trumpet/
User avatar
BGuttman
Posts: 6390
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: 9 foot 3-4 valve brass

Post by BGuttman »

Mikebmiller wrote: Tue Dec 08, 2020 4:35 pm What is the difference between a saxhorn and a euphonium? Bore size?
The saxhorn I'm most familiar with is the over the shoulder type. Very rare nowadays (again, except in Civil War Re-enactment bands).

The Saxhorn is more conical than a Baritone (English) instrument but less conical than a Euphonium.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

brassmedic
Posts: 1111
Joined: Fri Dec 14, 2018 12:07 pm
Contact:

Re: 9 foot 3-4 valve brass

Post by brassmedic »

jacobgarchik wrote: Sat Dec 05, 2020 11:55 am whatever you call this

http://www.brassark.com/museum/closecornu.html
That's the Cornu I built for Noah. It was a military instrument in ancient Rome. The valves are a modern addition, obviously. These are some originals they found in Pompeii.
cornu.png
You do not have the required permissions to view the files attached to this post.
Brad Close Brass Instruments - brassmedic.com
Posaunus
Posts: 3998
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: 9 foot 3-4 valve brass

Post by Posaunus »

LeTromboniste wrote: Sat Dec 05, 2020 10:49 am
marccromme wrote: Sat Dec 05, 2020 10:14 am Wagner tubas?

Yes, usually played by french horn players in Nibelungen, Walkyrie or similar late romantic operas, often Wagner, Mahler, Berlioz. The most famous ones are from Alexander, Mainz, Germany.

https://gebr-alexander.de/en/wagner-tubas/
No Wagner tubas in Mahler or Berlioz that I know of (although both did write for other Bb valved instruments).

Strauss, Bruckner and Stravinsky, yes.
Bruckner Symphony #7:
The symphony requires the following orchestra:
• woodwinds: 2 flutes, 2 oboes, 2 clarinets in A, 2 bassoons
• brass: 4 horns in F, 3 trumpets in F, 3 trombones, 4 Wagner tubas (2 B♭ tenors, 2 F basses)*, contrabass tuba
• percussion: timpani, cymbals, triangle
• strings: violins 1, 2, violas, violoncellos, double basses

* Used in the 2nd and 4th movements only.
User avatar
LeTromboniste
Posts: 1193
Joined: Wed Apr 11, 2018 7:22 am
Location: Sion, CH

Re: 9 foot 3-4 valve brass

Post by LeTromboniste »

Posaunus wrote: Sat Apr 17, 2021 4:41 pm
LeTromboniste wrote: Sat Dec 05, 2020 10:49 am

No Wagner tubas in Mahler or Berlioz that I know of (although both did write for other Bb valved instruments).

Strauss, Bruckner and Stravinsky, yes.
Bruckner Symphony #7:
The symphony requires the following orchestra:
• woodwinds: 2 flutes, 2 oboes, 2 clarinets in A, 2 bassoons
• brass: 4 horns in F, 3 trumpets in F, 3 trombones, 4 Wagner tubas (2 B♭ tenors, 2 F basses)*, contrabass tuba
• percussion: timpani, cymbals, triangle
• strings: violins 1, 2, violas, violoncellos, double basses

* Used in the 2nd and 4th movements only.
Yes, definitely used in Bruckner
Maximilien Brisson
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

You learn something new every day!


FOZA3dVWQAcnpg7.jpeg
You do not have the required permissions to view the files attached to this post.
Kbiggs
Posts: 1303
Joined: Sat Mar 24, 2018 11:46 am
Location: Vancouver WA

Re: 9 foot 3-4 valve brass

Post by Kbiggs »

Burgerbob wrote: Fri Dec 04, 2020 1:13 pm There are marching euphoniums, and even bariphoniums if you want to split hairs enough.
“Bariphonium” sounds like a medical procedure.
Kenneth Biggs
I have known a great many troubles, but most of them have never happened.
—Mark Twain (attributed)
User avatar
Ozzlefinch
Posts: 108
Joined: Sat Jan 15, 2022 7:31 am
Location: United States

Re: 9 foot 3-4 valve brass

Post by Ozzlefinch »

Not sure where my 4 valvers fit in. One thing I do know for certain is that I really need to figure out how to take a decent photo of them. I currently have 2, one is in the shop getting it's 100 year tune-up.

Image
User avatar
JohnL
Posts: 1905
Joined: Fri Mar 23, 2018 9:01 am
Contact:

Re: 9 foot 3-4 valve brass

Post by JohnL »

Ozzlefinch wrote: Thu Apr 07, 2022 6:50 amne thing I do know for certain is that I really need to figure out how to take a decent photo of them.
A couple suggestions:

1) Use nature's softbox; shoot outdoors on a cloudy day (basically, you want it just cloudy enough that you cast little to no shadow.

2) Set up someplace where you have enough room to take a few steps back rather than having to use a wide-angle lens (or a wide-angle setting on a zoom camera).

3) Shoot square on rather than at an angle.

Almost everything on my site was shot in my back yard on cloudy days using old sheets as backdrops. The horn is on a stand (sometimes I put the stand on a table so I don't have to get down so low) and I try to keep the camera level.
MrHCinDE
Posts: 809
Joined: Sun Jul 01, 2018 11:00 am
Location: Ludwigsburg, Germany

Re: 9 foot 3-4 valve brass

Post by MrHCinDE »

Tenor fanfare trumpet
Bass Flügelhorn (the one in the picture below is on the way to me, should be here in the next couple of days 😀)
55F85C3D-308C-4664-B691-1A649BFCB324.png
You do not have the required permissions to view the files attached to this post.
User avatar
jacobgarchik
Posts: 227
Joined: Sat Oct 27, 2018 6:07 pm

Re: 9 foot 3-4 valve brass

Post by jacobgarchik »

from a facebook weird instrument group
valved alphorn
*literally* 9 foot
Screen Shot 2024-03-13 at 3.14.36 PM.png
Screen Shot 2024-03-13 at 3.14.43 PM.png
You do not have the required permissions to view the files attached to this post.
marccromme
Posts: 358
Joined: Fri Mar 30, 2018 7:03 am
Location: Copenhagen, Denmark
Contact:

Re: 9 foot 3-4 valve brass

Post by marccromme »

jacobgarchik wrote: Wed Mar 13, 2024 1:19 pm from a facebook weird instrument group
valved alphorn
*literally* 9 foot
Cool. First time ever I have seen a brass and valved alphorn. I did only encountour Wooden ones
2bobone
Posts: 385
Joined: Sun Mar 25, 2018 1:10 pm
Location: Pennsylvania

Re: 9 foot 3-4 valve brass

Post by 2bobone »

I don't know the first thing about "Alp Horns" with valves [Is that a Valph-Horn ?] but I definitely remember being in the Wallowa mountains, the "Alps" of Oregon {C= 1985 ?], where I discovered an Alphorn hanging over the counter inside a convenience store. The owner was delighted when I told him that I could play it and the resulting photograph is my proof ! I'm sure that my resounding efforts disturbed a whole lotta fauna and flora ! That sucker could REALLY project [although my son at ground ZERO didn't seem too upset !] !
You do not have the required permissions to view the files attached to this post.
Last edited by 2bobone on Wed Mar 13, 2024 7:45 pm, edited 2 times in total.
2bobone
Posts: 385
Joined: Sun Mar 25, 2018 1:10 pm
Location: Pennsylvania

Re: 9 foot 3-4 valve brass

Post by 2bobone »

"Bass Flügelhorn (the one in the picture below is on the way to me, should be here in the next couple of days 😀)"

Hmmmm ! It looks almost identical to the Mirafone "Tenor Horn" I bought from Roger Bobo back in the mid-60's ! I believe that Leonhard Paul of the Mnozil Brass plays the same instrument on many occasions.
You do not have the required permissions to view the files attached to this post.
User avatar
Finetales
Posts: 1090
Joined: Fri Mar 23, 2018 12:31 pm
Location: Los Angeles
Contact:

Re: 9 foot 3-4 valve brass

Post by Finetales »

I can't remember who, but there is a brass maker who sells valve sections that you can plug into existing wooden alphorns.
2bobone wrote: Wed Mar 13, 2024 7:40 pm "Bass Flügelhorn (the one in the picture below is on the way to me, should be here in the next couple of days 😀)"

Hmmmm ! It looks almost identical to the Mirafone "Tenor Horn" I bought from Roger Bobo back in the mid-60's ! I believe that Leonhard Paul of the Mnozil Brass plays the same instrument on many occasions.
Leonhard played a beer hall bass trumpet like that a long time ago, but he's been playing on Schagerl horns along with the rest of Mnozil for many years. First he had a custom made top-action rotary bass flugelhorn, and now he plays a standard Schagerl Wunderhorn.
User avatar
jonathanharker
Posts: 73
Joined: Sat Aug 13, 2022 11:13 pm
Location: Wellington, New Zealand
Contact:

Re: 9 foot 3-4 valve brass

Post by jonathanharker »

V.F. Červený invented (1867 patent) a line of instruments from at least E♭ alto to B♭ contrabass, called the armeeposaune which were cylindrical bore saxhorn-shaped instruments, with the upward bell pointed forwards. I'm pretty sure the contrabass in 18' B♭ (pictured) would make a great cimbasso for Verdi and Puccini.
Image
Image CC-BY, University of Edinburgh, via Europeana.
Post Reply

Return to “History of the Trombone”