MaxiClapper
- Matt K
- Verified
- Posts: 4288
- Joined: Tue Mar 20, 2018 10:34 pm
- Contact:
MaxiClapper
Has anybody tried these things by Stomvi?
https://stomvi.com/en/products/compleme ... r-trombone
Dillons has them listed but only has the picture of the device, not how it’s mounted on the F attachment tubing so I was scratching my head trying to figure out where they go. Now that I see the stomvi marketing material… actually, I’m still not quite sure what they do
https://stomvi.com/en/products/compleme ... r-trombone
Dillons has them listed but only has the picture of the device, not how it’s mounted on the F attachment tubing so I was scratching my head trying to figure out where they go. Now that I see the stomvi marketing material… actually, I’m still not quite sure what they do
-
- Posts: 1028
- Joined: Wed May 02, 2018 9:20 pm
Re: MaxiClapper
It's a Pocket Rocket attached to the trombone!!
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
- harrisonreed
- Posts: 5224
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: MaxiClapper
Looks like the valve caps Pacho Flores uses.
- Burgerbob
- Posts: 5131
- Joined: Mon Apr 23, 2018 8:10 pm
- Location: LA
- Contact:
-
- Posts: 495
- Joined: Sat Sep 22, 2018 12:48 pm
- Location: Central Jersey
Re: MaxiClapper
From the picture, it looks as if it will only fit on a specific style of f-tubing wrap, eliminating using it on anything vintage.
Something in the description got lost in the translation, me thinks.
Something in the description got lost in the translation, me thinks.
- Matt K
- Verified
- Posts: 4288
- Joined: Tue Mar 20, 2018 10:34 pm
- Contact:
Re: MaxiClapper
Possibly, got something about mini horns inside them and amplifying the 6th partial? I’m curious because I always am but not almost $500 curious
- JohnL
- Posts: 1889
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: MaxiClapper
That's what happens when you use a MaxiClapper, three or more lefreQues, and two Pocket Rockets simultaneously. The acoustic synergy generates a sonic singularity and the next thing you know, you're on the wrong side of the event horizon.
I'm trying to figure out if there's a way to control where the singularity point develops; maybe drop it somewhere in the flute section?
-
- Posts: 23
- Joined: Wed Nov 21, 2018 6:50 pm
- Location: Edmonton
Re: MaxiClapper
With a little luck it would take the entire woodwind section out.JohnL wrote: ↑Thu Dec 29, 2022 10:40 amThat's what happens when you use a MaxiClapper, three or more lefreQues, and two Pocket Rockets simultaneously. The acoustic synergy generates a sonic singularity and the next thing you know, you're on the wrong side of the event horizon.
I'm trying to figure out if there's a way to control where the singularity point develops; maybe drop it somewhere in the flute section?
-
- Posts: 201
- Joined: Mon Aug 06, 2018 7:25 pm
- Location: NC
Re: MaxiClapper
These guys. It's an expensive paper weight. Looks cool. Not 500 bucks cool though. These le freque pieces of metal go up to a thousand or more. You can buy the metal and get good tech to make you one for a 3rd of the cost. Ahhhhhh the Zeitgeist is real in these things.ldmitruk wrote: ↑Thu Dec 29, 2022 8:44 pmWith a little luck it would take the entire woodwind section out.JohnL wrote: ↑Thu Dec 29, 2022 10:40 am
That's what happens when you use a MaxiClapper, three or more lefreQues, and two Pocket Rockets simultaneously. The acoustic synergy generates a sonic singularity and the next thing you know, you're on the wrong side of the event horizon.
I'm trying to figure out if there's a way to control where the singularity point develops; maybe drop it somewhere in the flute section?
Conn 112 H w/bored out rotors w/heavyweight caps, Sterling Silver Edward's B3 and Shires B3 leadpipe w/62H slide. Long Island Brass Comp Dimensions 29.5 inner rim .323 backbore solid silver lefreque
- harrisonreed
- Posts: 5224
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: MaxiClapper
How dare you!!
-
- Posts: 3973
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: MaxiClapper
How about a recording / video demonstrating the effect of these (looks like little bicycle bells)?
If they're so good, it must be audible. And very valuable!
If they're so good, it must be audible. And very valuable!
- elmsandr
- Posts: 1085
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
Re: MaxiClapper
Best I can tell, these are a disposable income detector and signal generator.
Cheers,
Andy
Cheers,
Andy
-
- Posts: 201
- Joined: Mon Aug 06, 2018 7:25 pm
- Location: NC
Re: MaxiClapper
Conn 112 H w/bored out rotors w/heavyweight caps, Sterling Silver Edward's B3 and Shires B3 leadpipe w/62H slide. Long Island Brass Comp Dimensions 29.5 inner rim .323 backbore solid silver lefreque
-
- Posts: 201
- Joined: Mon Aug 06, 2018 7:25 pm
- Location: NC
Re: MaxiClapper
I think therefore it is, has cost more money than not!
Conn 112 H w/bored out rotors w/heavyweight caps, Sterling Silver Edward's B3 and Shires B3 leadpipe w/62H slide. Long Island Brass Comp Dimensions 29.5 inner rim .323 backbore solid silver lefreque
- heldenbone
- Posts: 174
- Joined: Tue Aug 21, 2018 9:17 pm
- Location: Ohio
Re: MaxiClapper
I tried using them with my TweeQers and Acousti-Coil. Had to stop immediately. The enhanced unsympathetic vibrations made my sound aaAAAhhhhh OHH NNNOOOO not againnnnnn.
>! BOOM !<
>! BOOM !<
--
Richard
Richard
- harrisonreed
- Posts: 5224
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: MaxiClapper
Anyone remember the acoustic piece of wood that they claimed would enhance the tone of any instrument even if you just put it in your pocket?
-
- Posts: 1028
- Joined: Wed May 02, 2018 9:20 pm
Re: MaxiClapper
The Pocket Rocket. Mentioned above
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
- harrisonreed
- Posts: 5224
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: MaxiClapper
I thought so. Doing a Google search for that term seems ill advised, but I wish I had a link to the site that used to sell it.
- JohnL
- Posts: 1889
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: MaxiClapper
Here ya go:
https://web.archive.org/web/20080706040 ... ocket.html
Looks like they've vanished from the market...
https://web.archive.org/web/20080706040 ... ocket.html
Looks like they've vanished from the market...
-
- Posts: 3973
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: MaxiClapper
A suggestion: I strongly recommend replacing Google with DuckDuckGo. Awful name, I know - but since I've changed to DuckDuckGo for my searches, I'm no longer followed and harassed by all the advertisements that Google previously dumped on me. It's like browsing freedom for free. I was reminded of this recently when I did a search on my Android phone using the Google default search engine. In the five days since then, I've been inundated with ads clearly triggered by that one search expedition.
-
- Posts: 201
- Joined: Mon Aug 06, 2018 7:25 pm
- Location: NC
Re: MaxiClapper
Wow, someone bought this huh? Crazy.
Conn 112 H w/bored out rotors w/heavyweight caps, Sterling Silver Edward's B3 and Shires B3 leadpipe w/62H slide. Long Island Brass Comp Dimensions 29.5 inner rim .323 backbore solid silver lefreque