Page 1 of 1

Velcro replacement

Posted: Sun Apr 07, 2019 9:10 am
by jimtheob
Hi. folks. I have a Gard Wheelie Bag for my bass trombone that has some worn velcro and if you are familiar with this case, it is a bit annoying when velcro doesn't hold the padding in place strongly. Do any of you know if Gard can supply replacement velcro (I looked and no luck)? If not, if you have to fix velcro, what do you think is the best way?
Thanks in advance.

Jim

Re: Velcro replacement

Posted: Sun Apr 07, 2019 9:15 am
by BGuttman
You can buy Velcro "tape" at Home Depot. Some of the varieties are adhesive backed (although the adhesive is probably too weak to be of use). You can glue or sew on as appropriate.

Re: Velcro replacement

Posted: Sun Apr 07, 2019 10:15 am
by Doug Elliott
Velcro comes in different strengths. I don't know that bag, but if you want to really hold (and be difficult to separate) get the Industrial kind. I'm pretty sure I've seen it at Home Depot.
https://www.velcro.com/products/industrial-strength/

Even with that, the sticky back glue doesn't last forever. Sew it on.

Re: Velcro replacement

Posted: Sun Apr 07, 2019 12:18 pm
by scott
I’ve had the velcro in my Marcus Bonna replaced at a luggage repair shop. They did a fine job.

Re: Velcro replacement

Posted: Mon Apr 15, 2019 8:14 am
by JLivi
I have an Eastman case and was having issues with the velcro on the inside of the case. I had pedal board tape (for guitar pedals) lying around in my basement and I used that and it worked great! I had to use a seam ripper to get the old velcro off.

I'm pretty sure you can find different strengths of velcro at any hardware store.